How To Unclog Auger On Pit Boss
We've all been there: accidentally forgetting to comprehend your pellet grill while it rains outside, or calculation wood pellets to your grill when they're a footling too moisture. Both of these situations can cause your Pit Dominate 700FB Pellet Grill to terminate working properly.
You'll be happy to know your Pit Boss Grill isn't broken forever; all you demand to exercise is set up your clogged auger.
Afterwards searching the internet far and wide, we have managed to come up with a solution.
In this commodity, nosotros'll become over all yous need to know about unclogging your jammed auger, as well equally our top tips to go on it clean and running.
What Is an Auger and How Does It Work?
A Pit Boss pellet grill or pellet smoker uses woods to create a great smoke flavour profile.
These pellets are fed into the smoker, controlled by an electronic console that helps maintain a steady grilling temperature.
All this is done with the help of the auger motor, feeding the pellets direct from the hopper and into the firepot.
This allows yous to exit your Pit Boss grill to do its job, requiring little babysitting from you.
Why Does It Get Chock-full?
1 of the main things causing the auger on pellet grills to get jammed is due to moisture pellets. If your wood pellets take been left to get moisture, or humidity has got to them, they'll swell upward and cause the auger to become jammed [1].
That'due south why it's important to keep your pellet grill or smoker stored in a absurd and dry place, away from the rain.
If y'all've had your Pit Dominate 700FB for a number of years or you lot live in an environment that is boiling, or at that place's a lot of rain, chances are you'll take a chock-full auger every once in a while.
How Do You Unclog the Auger on a Pit Boss Grill?
To fix an auger jam, you'll need to remove quite a few pieces. This includes the control board, hopper, motor, and then the screws holding the office in place. You may besides demand to use a pipe wrench to remove the auger.
In theory, this method should piece of work on any Pit Boss or Pellet Smoker (including your 700FB), but the method may accept to exist modified slightly depending on your model.
Steps to Unclogging the Auger on a Pit Dominate 700fb
As always, ensure your pellet grill is unplugged before you decide to practice whatsoever sort of maintenance on it.
If yous struggle to unclog your auger, consider calling a professional to set up the jam in your Pit Dominate motor.
If you're more than mechanically inclined, feel costless to follow our steps to ready that clog:
What you'll need:
- Screwdriver
- Socket wrench
- Allen wrench
- Chisel
- Vacuum
Step 1: Removing The Bottom Panel
To get-go, you'll want to remove the auger from the Pit Boss. To practice then, you lot'll want to lay your Pit Boss 700FB on its behind.
This volition make information technology far easier for yous to remove the bottom console of the hopper.
Grab your screwdriver and remove the screws from the hopper. Once you've done so, move everything to the side and identify the screws for safekeeping.
Pace 2: Move The Control Board
Side by side, y'all'll need to remove both of the screws from the control board. You lot'll notice them on the top and the bottom of the panel. Once the screws take been removed, carefully feed the control board through the hopper.
The control board shouldn't come all the way out. All y'all want to do is move the board out of the style enough to get to the motor - do not attempt to remove the wires that are securing it in identify.
As long as y'all tin remove the auger, it's fine to leave the wires dangling at the lesser of the hopper.
Step 3: Movement The Hopper
On the hopper, you'll need to remove both the back and front end screws.
Make sure you have a flat and steady surface to identify the hopper on before you become ahead and remove it.
Like to the control board, the hopper is attached to the Pit Boss via the power cord then yous won't exist able to remove information technology completely.
Pace iv: Remove The Commodities
Before you're able to remove the auger from your Pit Boss, you'll demand to remove the Allen head nut. You can use your Allen tool to remove this nut besides as a ratchet wrench. Make sure you have the right size wrench.
In one case you've removed the nut and commodities you can let the motor hang at the bottom of the Pit Boss.
Step 5: Remove The Auger Spiral
Once the motor has been removed, you'll notice 1 screw holding the auger in identify. Remove this spiral with a pipe wrench.
This volition turn the auger counterclockwise so you can then pull it out.
If the auger is all jammed upwardly, it'll take a bit more than working forcefulness to get the auger gratis.
There isn't an additional step y'all demand to have other than turning the screw until information technology tin can break free.
Cleaning The Auger
Once you lot've got the auger removed, y'all tin use sandpaper to pause off the pellet. If you have pellets that are a lot easier to remove, yous can clean upwardly the tube by using a chisel to break them apart.
As you lot're removing the pellet with the chisel, you'll need to proceed vacuuming up the broken pieces.
Paper towels can make clean whatsoever droppings and grime remaining. When information technology becomes easy for the auger to slide in and out, that means it is nice and clean and gear up to be put back together.
The terminal step is to put everything back and stand the Pit Boss back up.
When it comes to filling the hopper back upwards, make sure you're merely using dry pellets. You may have to prime your grill top before you brainstorm cooking. If your fire pot begins filling upwards, that ways your grill is prepare and set to use.
Read More:
- Who Makes Pit Boss Grills?
- Pit Boss Classic VS Pit Boss 700FB
Fixing Pit Dominate 700FB Auger Jam: The Lesser Line
Cleaning upwardly your auger isn't exactly an piece of cake and quick process, and then to save yourself fourth dimension and ensure your Pit Boss is always working, only utilise dry pellets in your hopper.
Once you lot've taken apart your Pit Boss 700FB, ever keep the screw shut to you as they're easier lost than found.
References:
- https://world wide web.woodpellets.com/blog/2015/02/05/what-happens-to-moisture-wood-pellets/
Was this article helpful?
Yes No
Source: https://carnivorestyle.com/pit-boss-700fb-auger-not-turning/
0 Response to "How To Unclog Auger On Pit Boss"
Post a Comment